| Resume Category : Mechanical Engineers |
|
| Description |
CURRICULAM -VITAE
BHUPENDRA KARKI
OBJECTIVE
I am general, cooperative, and a team player with good communication skills. I am technically sound, creative, hard working & aim to be an effective and honest citizen. I would like to work with people who have pride, honesty, integrity & dedication to their work.
WORK EXPERIENCE
1-Organization :JAKSON & COMPANY LlD.
C-266-267 Phase-2 Mayapuri Ind Area
New Delhi-64
JAKSON & COMPANY is one of the Jakson Group, is one of the leading Manufacturer of Silent D.G.Set , 7.5 KVA to 1200 KVA.
Duration : JUNE 2006 Till dated
Designation : Programmer and C.N.C. Shop-In-charge
Job Profile:
• Development & fabrication Design of Canopy.
• Responsible for monitoring of production quality of C.N.C. Punching, Bending and take Corrective action and coordination with Quality Control and Production Engineers.
• Responsible to manage the production in shop floor CNC, Fabrication, Assembly, Base Frame, Paint shop etc.and to provide timely feedback and production reports to the Management.
• To monitor the daily production reports of all departments.
• .Responsible for getting design change for Betterment.
• To manage the production related job on priorities.
• Upgrading and continuous improvement in process, planning and resources planning.
• Identify and develop the vendors to source the material for the Manufacturing of Silent DG sets.
• To prepare the Bill of Material and Costing Sheets of all the Projects.
• Releasing all component drawings used in Canopy.
• Interfacing Production Dep’t. For problems faced during assembling of Canopy.
• Complete fabrication & development drawing provided basic database & drawings for the development of the software specialized for Canopy Development Drawing.
• Responsible for continuous improvement in process& planning
• To ensure implementation of ISO in all section.
• Responsible to look after all machines, (crane, welding M/c, grinder, sander, C.N.C. Punching M/c, bending M/c & compressor.
2-Organization :TIMKEN SERVICES (P) LTD.
Plot No-138Sec-8 IMT Manesar
Gurgon (H.R.)
TIMKEN SERVICES, is the Manufacturer of Silent D.G.Set , 15 KVA to 250 KVA
Duration : March 2004 to May 2005
Designation : Programmer/Production Engineer.
Job Profile :
• Responsible to look after all Machines, C.N.C.Punching, Bending & Compressor etc.
• To give the daily production target of C.N.C M/c shop, Fabrication and Assembly shop,.
• Responsible for monitoring of production quality Fabrication and Assembly.
• To co-ordinate with Dispatch Department for timely dispatches.
• Interfacing Production Dep’t. For problems faced during assembling
• Responsible for house keeping. Responsible for optimum utilization of Raw material.
• Responsible for making powerful Machine routings for Turret Punch press to get maximum output.
• Prepare online Schedule Programme for Turret punch press .
• Weekly Backup Of Drawings & Programmes
3-Organization : VENUS CONTROLS & SWITCHGEAR PVT. LlD.
Plot No-30/31 Sec-10 A HUDA Gurgon (H.R.)
It’s a Flagship Company of the Venus Group, is one of the leading
Manufacturer of L.T Switchgear Panels, Control Panels (Bolted MCC &
PCC), Switchboard items.
Duration : March 2002 to May 2004
Designation : Programmer Cum Design Engineer.
Job Profile : From April 2003 till 2004
• Responsible to look after all Machines, C.N.C.Punching, Bending & Compressor etc.
• To give the daily production target of C.N.C M/c shop, Fabrication and Assembly shop,.
• Responsible for monitoring of production quality Fabrication and Assembly.
• Interfacing Production Dep’t. For problems faced during assembling
• Responsible for house keeping. Responsible for optimum utilization of Raw material.
• Responsible for making powerful Machine routings for Turret Punch press to get maximum output.
• Prepare online Schedule Programme for Turret punch press .
• Weekly Backup Of Drawings & Programmes
From April 2003 to 2004 (Design Engineer)
• Development & fabrication Design of Motor Control Centre(MCC), Power Control Centers(PCC), Control Desk, Push Button Distribution Boards, Bus duct, Front Access Panel
• Preparation of fabricated Bill of Material
• Busbar design for MCC, PCC, Bus duct, Front Access Panel.
• Releasing all component drawings used in L. T. Switchgear including MCC & PCC construction details, Trolley details, PVC shroud, Front Door Cutout details & Supporting channel details.
• Interfacing Production Dep’t. For problems faced during assembling of Switchgear.
• Complete fabrication & development drawing of Birla Yamaha Gensets, including innovative to final assembly stage drawing.
• Total costing of the steel & bus bar required in the manufacturing of panels.
• Provided basic database & drawings for the development of the software specialized for MCC & PCC Development Drawing.
From March 2002 to March 2003 As Diploma Engineer Trainee (Prod. Engineer.)
• Interfacing Production Dep’t. For problems faced during assembling Panel.
• Fabrication Design for Bolted type Motor Control Center (MCC), Power Control Center, Responsible for completing all the activities(Development, design & drawing) under pre-assembly stage of switchgear
• Responsible for Design, Drawing & fitment, of bus bars creating all the possible views of the panels in Auto CAD.
• Carrying out internal inspection of Switchgear under pre-assembly stage
• Complete Design & Drawing of the entire panel & other supporting Dielectric supports.
EDUCATIONAL DETAILS
• Technician Diploma in Mechanical Engg (Production) from Govt. Polytechnic College Nanital in 2002.
• 10+2 from U.P. Board year 1998.
• 10th from U.P. Board year 1996.
• C.C.A (Certificate in Computer Application) from E.S.T.C. Ramnagar Nainital (U.A.).
One year certificate course in AUTOCAD.
PROJECT DETAIL
• Total Fabrication Design of Silent Range of Gensets, including 3D Modeling for Complete Visualization & RD.
• Standardization of panel designs & drawings, supplying with fully computerized drawing using design software’s like AUTO-CAD R-14, 2000, MDT .
• Constructing the Basic Control Flexi Module (Cross & Corner Bars), the base for the bolted type Canopy & Panel.
SOFTWARE & HARDWARE KNOWLEDGE
• Operating systems : DOS, Windows 95, 98, 2000, Xp.
• Design software : AP100, Auto CAD R-14, Auto CAD 2000, 2002, M.D.T,
3D Architect, Design CAD 97
• Application software : MS Office (Word, Excel, Power Point)
Version: 97, 2000 & Xp.
• Assembling : C.P.U(Hard Disk, Microprocessor, LAN Card, Display
Card, CD Rom, Floppy Drive etc).
• Installation : All software’s in use & Operating Systems.
SEMINARS &WORKSHOPS
• I have attended in Training programme of AMADA INDIA Soft wear Education, Delhi.
CO- CURRICULAR ACTIVITIES
• Member of Internal Auditor Team for ISO 9001
• Member of R & D team for solid modeling & Designing.
INTERESTS
• Reading Computer & Design Magazines.
• Keeping track of the latest technologies in Design.
• Internet Surfing.
HOBBIES
• Listening to Music
• Meditation
• Painting & traveling.
PERSONAL DETAILS
• Date of Birth : 1st July 1980
• Sex : Male
• Marital Status :Unmarried
• Category :General
• Nationality : Indian
• Domicile state :Uttranchal.
• Languages :Hindi & English.
• Expected salary :About 2.64 lac per annum.
PERMANENT ADDRESS
C/o Smt. Ganga Karki
Canal colony K.D.road
Haldwani (Nainital)
Uttaranchal.
Ph- 05946-260783.
Mobile: + 91-9837258452
CORRESPONDENCE ADDRESS
Bhupendra Karki
WZ-74 Pankha Rd Mohan Nagar
Opp. D Block Janakpuri
New Delhi
Mobile: + 91-9818413873
+ 91-9899702191
E-Mail: karki_b2005@yahoo.co.in
karki_nainital@indiatimes.com.
Date: - Bhupendra Karki
Place: -
|
|
|
